English čeština
Login

Overhead crane 32t-15.9m

Electric overhead double girder crane is designed and constructed as a workshop type. It is intended for assembly of machines when continuous crane bridge travel and possibility of crab hoist and travel speed decreasing are required. In order to attain these parameters frequency converter controls the brake motors of bridge travel drive. Two-speed motors are used for drive of crab hoist and travel. There is used crab with low clearance height. This crab is equipped with overload protection.

Overhead crane 32t-15.9m 940003_100 Overhead crane 32t-15.9m 940003_104

Walkway is arranged to provide maintenance of crab and its cross trolley. It is located along the main girder of the crane bridge. Also driving units of bridge travel are located on this walkway. Crane is controlled from the floor by push button panel suspended on independent festoon cable. This festoon cable and crab festoon cable are flat.

Overhead crane 32t-15.9m 940003_103 Overhead crane 32t-15.9m 940003_102

Power is supplied for crane by small type conductor line that is fixed to crane runway girders. Limit switches limit final positions of all motions.

TECHNICAL SPECIFICATION
Lifting capacity 32000 kg
Span 15900 mm
Lift height 7680 mm
Lift speed 2.5/0.5 m/min
Crab travel speed 20/5 m/min
Bridge travel speed 0-12 m/min
Handling means pulley block with hook
Mains voltage 3 x 400 V, 50 Hz
Documents for downloads KPC_Ico_Pdf

 

KRALOVO POLE CRANES, a.s.
Brigadnicka 69, Brno, 621 00
Czech Republic
Reg. No.
:
46357408
Tax No.
:
CZ46357408
Phone
:
+420 - 602 757 422
Fax
:
-
Email
:
KPC Iso9001 YouTube GooglePlus Facebook