|
Overhead crane 63/32t |
SKODA Plzen, CR |
|
Overhead tongs crane 25t |
Trinecke zelezarny, CR |
|
Reconstruction of overhead
casting crane 200t+50/12.5t to the increased lifting capacity
240t+50/12.5t |
U. S. Steel Kosice, SR |
|
Reconstruction of overhead
crane 50/8t to the increased lifting capacity 70/8t |
Energeticke strojirny
Brno, CR |
|
Handling the 110t product by
means of 63/8t crane and special device |
Nova hut (KPS), CR |
|
Special air-conditioned
cabins (also with sliding safety shields for charging and casting
cranes) |
U. S. Steel Kosice, SR
|
|
Supplies of
container sea unloader of 40t load capacity
|
GUNANUSA Utama
Fabricators, Indonesia |
|
Reconstruction of 2 cranes
200t+50/12.5t to the increased lifting capacity 200t+70/12.5t |
U. S. Steel Kosice, SR |
|
C-hooks of lifting capacity 5t up to 35t for handling the sheet
coils |
Nova hut, CR
Limart, CR
U. S. Steel Kosice, SR
Kralodvorske zelezarny, CR |
|
Equipment for handling the heating bodies on production line |
UNIVA, Blansko, CR |
|
Reconstruction of overhead
crane 80/12.5t to the increased capacity 96.1t (documentation) |
ZDAS, Zdar nad
Sazavou, CR |
|
Participation in preparing of International Standards of Cranes (International
Organization for Standardization) |
ISO, Zeneva,
Switzerland |
|
Self-winding cable drums (for transfer of data, electric current
and control signals between fixed and non-fixed parts of equipment) |
Trinecke zelezarny, CR
U. S. Steel Kosice, SR |
|
Reconstruction of 2 overhead cranes 10t to the
increased capacity 15t (documentation) |
Trinecke zelezarny, CR |
|
Documentation of parts of
overhead technological crane 6/20/2x15t |
AO "SMNPO", Sumy,
Ukraine
|
|
Overhead crane 32t |
Dieffenbacher-CS, Brno,
CR |
|
Systems of emergency braking
of the main hoists of 250t and 280t overhead casting cranes |
U. S. Steel Kosice, SR |
|
Participation in preparing
of European Standards for Cranes (Comite
Europeen de Normalisation) |
CEN, Brussels, Belgium |
|
Incorporation and
translations of European Standards for Cranes into CSN |
CSNI, Praha, CR |
|
Handling unit for rails -
synchronization of motion of two overhead beam cranes with lifting
capacity 7.5t
|
Trinecke zelezarny, CR |
|
Gantry cranes 20t |
Stavby silnic a zeleznic, Praha, CR |
|
Overhead grab cranes 24t (modifications
- documentation) |
Ceskomoravsky cement, Mokra, CR |
|
Multi-purpose hydraulic
handling equipment for rails (UMK - 4-97) |
Trinecke zelezarny, CR |
|
Expertise of overhead cranes
10t and 20t |
Georg Fischer DISA, Pribram, CR |
|
Automatic overhead grab
crane 10.7t |
Precheza, Prerov, CR |
|
Weighing casting beams 240t,
250t and 280t |
U. S. Steel Kosice, SR |
|
Overhead grab crane 3.2t
(for incinerating plant) |
DEZA, Val. Mezirici, CR |
|
Rotating bottom block 70t
with hydraulic drive |
U. S. Steel Kosice, SR |
|
Supplies of parts of
technologic cranes 8/10/10t and 8/15/15t |
S U A L, Russia |
|
Tongs hydraulic beam 25t
(for round blooms) |
Trinecke zelezarny, CR |
|
Reconstruction of overhead
crane 63/8t to the increased capacity 80t (stress analysis,
documentation) |
ALSTOM Power, Brno, CR |
|
Tongs hydraulic beam 63t
(for slabs) |
U. S. Steel Kosice, SR |
|
Stop log beam 16t |
Vodni
dilo Cunovo, SR |
|
Reconstruction of gantry
crane 50/25t (new trolley 23t) |
Trinecky inzenyring, CR |
|
Gantry crane 5t (modification
- documentation) |
Ceske drahy, Brno, CR |
|
Preparing of new, revision
of the existing and cancelling of obsolete CSN standards for
cranes |
CSNI, Praha, CR |
|
Hoisting equipment 1t |
Tyco Electronics,Kurim,
CR |
|
Overhead charging crane
2x70t (documentation and supplies of special parts) |
U. S. Steel Kosice, SR |
|
Mechanical rack tongs for
rails (KHK type) |
Trinecke zelezarny, CR |
|
Drive of dog house of
electric furnace |
Siderurgica Hunedoara, Rumania |
|
Overhead tongs crane 25t (modification
- documentation) |
Kovouprava, Kosice, SR |
|
Rotating casting beam 280t
with weighing |
Trinecke zelezarny, CR |
|
Overhead magnet-grab cranes
36t |
U. S. Steel Kosice, SR |
|
Reconstruction of overhead
crane 32/8t |
MICo, Trebic,
CR |
|
Expertise of frame of
casting trolley 250t |
Trinecke zelezarny, CR |
|
Beam 36t (documentation) |
JE Dukovany (MICo), CR |
|
Reconstruction of overhead
crane 12.5t to the increased capacity 20t (documentation)
|
Steel Servis Centrum
Metalex, Brezno, SR |
|
Ship unloader of coal for
power plant (cooperation in designing) |
Paiton, Indonesia, (Shanghai
Port M.P.) |
|
Reconstruction of gantry
crane 20t to the increased lifting capacity 25t (design and stress
analysis) |
BAEST, Benesov, CR |
|
Overhead magnet-grab crane
50t |
U. S. Steel Kosice, SR |
|
Reconstruction of gantry
crane 10t |
Metrostav Praha, CR |
|
Overhead magnet-tongs crane
35t |
Trinecke zelezarny, CR |
